Concrete · Pavers · Travertine — Windermere & West Orlando, FL Fully Insured · Free Estimates · (689) 407-6658
Service Area · Polk County

Concrete, Pavers & Travertine in Davenport, FL

Davenport — Polk’s Four Corners: resort communities (Solterra, Windsor Island) running pool decks hard, plus Providence and the ridge subdivisions entering the driveway-upgrade cycle.

Fully InsuredFree Estimates10,000+ in the city · tens of thousands across the Four Corners growth area48-Checkpoint Craft Code
Fully InsuredFree EstimatesWritten WarrantyARC / HOA Submittal Support48-Checkpoint Craft Code
Serving Davenport — The Short Version

Windermere Concrete installs concrete driveways, paver systems, travertine pool decks, patios, and walkways throughout Davenport, FL (33837, 33896, 33897). The Polk County corner of Four Corners — resort-residential growth where the Disney economy meets the I-4 corridor. Typical work here: high-cycle resort pool decks and patios, plus residential driveway widening and paver conversions in providence and the ridge subdivisions. Free estimates — written proposal within one business day.

Davenport lives a double life. On one side, resort communities — Solterra, Windsor Island, the vacation-home belts off US-27 — run pool decks and patios hard, with guest turnover punishing every surface and owners needing repairs and refreshes on a schedule, not someday. On the other, Providence, Astonia, Forest Lake, and the residential subdivisions climbing the ridge give Polk’s corner of Four Corners the familiar Florida cycle of builder-minimum driveways heading into widening and paver upgrades. The Lake Wales Ridge adds sandhill topography most of metro Orlando lacks: fast-draining deep sands that swallow compaction effort unless the base is built in disciplined lifts. Between resort durability and ridge-sand base work, Davenport rewards the unglamorous parts of this trade — which happen to be the parts we systematized.

The ground rules here: Lake Wales Ridge sands drain fast and compact stubbornly — bases go in thinner lifts with more passes, or the surface settles no matter how good the finish looks. And the paperwork rules: City of Davenport or Polk County permitting; resort communities and Providence run HOA/design review. Both are handled inside our process — probing and drainage mapping in the Craft Code’s Ground Truth phase, and submittal documentation prepared with every proposal.

Full Catalog · Davenport

Every service we bring to Davenport

No. 02

Concrete Patios

Outdoor-living slabs designed around how you actually entertain — poured with deliberate falls, layout-matched joints, and…

Explore the service
No. 08

Paver Driveways

Interlocking paver and clay-brick driveways built as engineered systems — the estate standard for the Butler Chain communities…

Explore the service
The Standard

The Windermere Craft Code

Eight phases, forty-eight checkpoints — applied in full on every Davenport project. The base is photographed before it disappears, the drainage is hose-tested in front of you, and the warranty arrives in writing.

I

Consultation & Design Fit

  • Walk the property with the owner and map the exact footprint
  • Match material, color, and finish samples to the home’s architecture
  • Review community ARC / HOA design standards before anything is priced
  • Photograph existing surfaces, elevations, and tie-in points
  • Identify pool cages, lanais, and structures the new surface must respect
  • Deliver a written, line-itemized proposal within one business day
II

Ground Truth

  • Probe the subgrade for organics, muck pockets, and loose fill
  • Trace irrigation, low-voltage lighting, and utility runs before digging
  • Establish fall lines so every surface sheds water away from the home
  • Confirm setbacks and easements against the plat where applicable
  • Plan equipment access to protect lawns, gates, and driveways
  • Stake and string the final layout for owner sign-off
III

Demolition & Excavation

  • Saw-cut clean separation lines before any breakout begins
  • Remove existing concrete or pavers and haul debris the same day
  • Excavate to the engineered depth for the specified system
  • Undercut soft zones and rebuild them with structural fill
  • Protect adjacent surfaces, borders, and plantings during removal
  • Re-verify grades after excavation, before base goes in
IV

Base Engineering

  • Place crushed base rock in measured lifts — never one dump
  • Compact each lift mechanically and check with a probe rod
  • Screed the setting bed (sand or concrete) to uniform depth
  • Install geotextile separation where soils demand it
  • Hold positive slope through the base, not just the surface
  • Document the finished base with photos before covering it
V

Forming & Reinforcement

  • Set forms to string lines and verify diagonals on rectangles
  • Place reinforcement — fiber mix, wire, or rebar — per the proposal
  • Chair steel to ride mid-slab, never resting on grade
  • Lay out control-joint positions before the truck is scheduled
  • Isolate the new work from the house, pool shell, and footers
  • Final pre-pour inspection signed off by the crew lead
VI

Placement & Finish

  • Confirm mix design and PSI on the ticket before discharge
  • Screed, bull-float, and finish within the working window
  • Apply the specified texture — broom, stamp, trowel, or exposed
  • Lay pavers or travertine to the approved pattern and bond lines
  • Cut borders and soldier courses tight, with consistent joints
  • Match color and release against the approved sample in daylight
VII

Lock-In & Cure

  • Saw or tool control joints at the engineered spacing and depth
  • Cure slabs with compound or wet-cure — never left to chance
  • Compact the paver field and drive sand fully into the joints
  • Activate polymeric sand with a controlled wetting pass
  • Set edge restraint so the field cannot migrate
  • Post cure/set times and protect the surface from traffic
VIII

White-Glove Handover

  • Pressure-rinse the work zone and remove every form and stake
  • Hose-test drainage with the owner watching the water move
  • Apply sealer at the correct cure window when sealing is scoped
  • Walk the finished surface together, corner to corner
  • Hand over the care guide, cure calendar, and warranty in writing
  • Follow up after the first heavy rain to confirm performance

48 checkpoints · every project · no exceptions

Local Coverage · Polk County

Neighborhoods we serve in Davenport

From the communities below to the streets between them — if you’re in or around Davenport, you’re inside our service area. Don’t see your community? Call anyway; we quote the address, not the list.

Providence
Solterra Resort
Astonia
Forest Lake
Windsor Island Resort
Bella Trae
Loma Vista
Horse Creek
Historic Downtown Davenport
ZIP codes338373389633897
Questions, answered plainly

Davenport homeowners ask us

Which concrete and paver services do Davenport homeowners request most?

High-cycle resort pool decks and patios, plus residential driveway widening and paver conversions in Providence and the ridge subdivisions. Those patterns follow the housing stock: Davenport — Polk’s Four Corners: resort communities (Solterra, Windsor Island) running pool decks hard, plus Providence and the ridge subdivisions entering the driveway-upgrade cycle. Whatever the project, it runs through the same 48-checkpoint Windermere Craft Code — probe, base, build, hose-test, warranty.

What do driveways and patios cost in Davenport?

At 2026 rates in Davenport: broom-finish concrete driveways run $9–$14 / sq ft installed and paver driveways $14–$24 / sq ft; concrete patios start around $8–$13 / sq ft, and travertine pool decks run $22–$32 / sq ft. Every service page on this site publishes its full investment table, and your written proposal pins the exact number line by line.

Is Davenport really inside your service area?

Yes — Davenport sits well inside the 50-mile radius we serve from our Windermere, FL 34786 base. The Polk County corner of Four Corners — resort-residential growth where the Disney economy meets the I-4 corridor. We reply the same day, walk the site within days, and deliver a written proposal within one business day of the visit.

What should I know about Davenport’s soil and drainage before building?

Lake Wales Ridge sands drain fast and compact stubbornly — bases go in thinner lifts with more passes, or the surface settles no matter how good the finish looks. It is the first thing we check, not the last: the Craft Code’s Ground Truth phase probes the subgrade and maps the fall lines before anything is priced, so the proposal reflects your lot — not a template.

Do I need permits or HOA approval for hardscape work in Davenport?

City of Davenport or Polk County permitting; resort communities and Providence run HOA/design review. We prepare the submittal documentation as part of every proposal and sequence the work approvals-first. It is the difference between a smooth project and a stop-work letter, and it costs you nothing extra.

Why hire a Windermere-based contractor for a Davenport project?

Because proximity plus standard beats either alone. We are minutes away, not a metro-wide franchise routing you to whichever crew is free — and every project, in every city we serve, is verified against the same 48 checkpoints, documented with photos, and closed with a written workmanship warranty and a post-rain follow-up.

Our reputation is being built one project at a time.

We’re an owner-run local company and we don’t publish testimonials we can’t stand behind — so you won’t find invented five-star quotes here. What you will find is a written warranty, published pricing, and a crew that answers the phone. If we’ve built for you, your honest review is the most valuable thing you can leave behind.

Free Estimate · Fully Insured

Davenport, let’s build something that outlasts the mortgage.

Walk the project with us. Get a written, line-itemized proposal within one business day — no pressure, no theater.

(689) 407-6658
Call Proposal
Call Now Free Proposal